Volume 1, 2009Progress in Propulsion Physics
|Page(s)||609 - 624|
|Section||Air-Breathing, Turbomachinery, and LAPCAT|
|Published online||16 September 2011|
Computations of flows over a turbine blade
To meet the needs of efficient turbine blade designs, computational fluid dynamics (CFD) predictions of a complex three-dimensional (3D) flow field in turbine blade passages have been incorporated in the design process during the last decade. Owing to the numerous advantages possessed by a 3D CFD technology, many industries already use a 3D blading technique in the design process of turbomachines. In addition, blade lean and sweep have been implemented to increase the blade row efficiency. Experimental studies have shown some advantages of these features. However, most of the experimental results were combined with other features together as well, thus making it difficult to determine the effects of individual superior features. The development of CFD techniques has made it possible to do 3D turbulent flow analyses in a very short time. In this study, numerical studies are presented to demonstrate the sweep effects on a transonic compressor airfoil. The purpose of this study is to investigate the sweep effects without changing other compressor blade features, i.e., keeping the blade outflow angles and section shapes to be the same at design sections for all cases. Through this study, the sweep effect in a transonic compressor rotor blade was tested. The results showed that the sweeps redistribute the flow reducing the secondary flow loss, depending on the baseline. It was shown that the forward sweep reduces the tip loading in terms of the static pressure coefficient.
© Owned by the authors, published by EDP Sciences, 2009